With the MTI04CS/CQ, MAZeT now presents the
second-generation multi-channel transimpedance amplifier. The
MTI04CS/CQ now offers the ability to adapt the compensation of the
transimpedance amplifier) to the input capacitance of the sensors, such
as photodiodes. This is done digitally in two stages, 5 and 80pF.
Programming of the transimpedance gain is carried out via three input pins to any of eight levels; and takes effect for all channels simultaneously.
Additional technical characteristics
Use and Typical Applications:
The sensor ICs are particularly suited as amplifiers for sensors with current output in the nA and µA range, such as opto arrays and rows in the UV, VIS, NIR and IR spectra.
This applies typically to applications in the area of industrial sensors (light grid, length, filling level, position, thickness and distance measurement), equipment for surface analysis and temperature measurement (thermal imaging, combustion supervision), detectors for alpha, beta, gamma and x-rays and ions as well as applications for measurement, regulation and control of light and laser sources.
IC Types
Illustrations:
Complete Color Sensor Head – Multi-Chip-Module (MCM), consisting of MAZeT True Color Sensor and MTI04C, each as ‘naked’ chip and LED on board plus Sensor Optics (0°, 45°)
Programming of the transimpedance gain is carried out via three input pins to any of eight levels; and takes effect for all channels simultaneously.
| Parameter |
min. | typ. | max. | Unit | Condition |
|---|---|---|---|---|---|
| Input current | 0,025 |
µA |
Stage 1 |
||
| 0,05 |
µA | Stage 2 |
|||
| ... | ... | ... | |||
| 20 |
µA | Stage 8 | |||
| Feedback resistor | 14000 |
20000 | 26700 | kOhm | Stage 1 |
| 7000 | 10000 | 13350 | kOhm | Stage 2 |
|
| ... | ... | ... | ... | ... | |
| 17 |
25 |
34 |
kOhm | Stage 8 | |
| Signal frequency at input (CPHOTODIODE < 5pF) |
4 |
6 |
16 |
kHz |
Stage 1 |
| 7 |
11 | 28 |
kHz |
Stage 2 |
|
| ... | ... | ... | ... | ... | |
| 500 |
800 |
1700 |
kHz | Stage 8 |
Additional technical characteristics
- Switchable frequency response compensation for input photodiodes (< 5pF and < 80pF)
- Good synchronization of the amplification and the temperature coefficients by the transfer function
- Settable power-save mode
- Supply voltage from 2.7 to 5.5V
- Extended temperature range from -40 to +125°C
Use and Typical Applications:
The sensor ICs are particularly suited as amplifiers for sensors with current output in the nA and µA range, such as opto arrays and rows in the UV, VIS, NIR and IR spectra.
This applies typically to applications in the area of industrial sensors (light grid, length, filling level, position, thickness and distance measurement), equipment for surface analysis and temperature measurement (thermal imaging, combustion supervision), detectors for alpha, beta, gamma and x-rays and ions as well as applications for measurement, regulation and control of light and laser sources.
IC Types
- MTI04CD – ‘naked’ chip (die)
- MTI04CS – 16-pin SOP16 package
- MTI04CQ – 16-pin QSOP16 package
Illustrations:
Complete Color Sensor Head – Multi-Chip-Module (MCM), consisting of MAZeT True Color Sensor and MTI04C, each as ‘naked’ chip and LED on board plus Sensor Optics (0°, 45°)
![]() |
|
Download Data Sheet - MTI04CS/MTI04CQ as PDF | ( 445 kB ) |
|
Download Application Report: Sensor Signal Measurement Chain as PDF | ( 486 kB ) |

